matemat/display/firmware/main.c

#include <inttypes.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <can.h>
#include <messages.h>

static bool report_change = false;

static void init() {
	/*
	PB2 BUTTON0
	PB3 BUTTON1
	PB4 BUTTON2
	PB5 BUTTON3
	PB6 BUTTON4
	PC0 BUTTON5
	PC1 BUTTON6
	PC2 CANTX
	PC3 CANRX
	PC4 BUTTON7
	PC5 VFDRS
	PC6 VFDRW
	PC7 VFDE
	PD0 VFDDB0
	PD1 VFDDB1
	PD2 VFDDB2
	PD3 VFDDB3
	PD4 VFDDB4
	PD5 VFDDB5
	PD6 VFDDB6
	PD7 VFDDB7
	*/
	// PB2, PB3, PB4, PB5, PB6, PC0, PC1, PC4: input, no pullup (button0..7)
	// PC5, PC6, PC7: output (VFD RS, RW, E), RS=0, RW=H, E=H
	// PD: output (VFD DB) - can be switched to input w/ pullup
	PORTB = 0x00;
	DDRB = 0x00;
	PORTC = _BV(PC6) | _BV(PC7);
	DDRC = _BV(PC5) | _BV(PC6) | _BV(PC7);
	PORTD = 0x00;
	DDRD = 0xff;

	// Initialize CAN interface
	can_init(BITRATE_125_KBPS);
	// Regular receive/transmit mode
	can_set_mode(NORMAL_MODE);

	// Filter for messages addressed to us (RTR on)
	can_filter_t us = {
		.id = CAN_HOSTID_DISPLAY,
		.mask = CAN_HOSTID_MASK,
		.flags = {
			.rtr = 1,
			.extended = 0,
		},
	};
	can_set_filter(0, &us);
	// Filter for public messages (RTR off)
	can_filter_t pub = {
		.id = CAN_HOSTID_BROADCAST,
		.mask = CAN_HOSTID_MASK,
		.flags = {
			.rtr = 0,
			.extended = 0,
		},
	};
	can_set_filter(1, &pub);

	// Enable interrupts to start reception
	sei();
}

static uint8_t get_buttons() {
	uint8_t pinb = PINB;
	uint8_t pinc = PINC;
	uint8_t buttons = 0;
	if (pinb & _BV(PB2)) buttons |= _BV(0);
	if (pinb & _BV(PB3)) buttons |= _BV(1);
	if (pinb & _BV(PB4)) buttons |= _BV(2);
	if (pinb & _BV(PB5)) buttons |= _BV(3);
	if (pinb & _BV(PB6)) buttons |= _BV(4);
	if (pinc & _BV(PC0)) buttons |= _BV(5);
	if (pinc & _BV(PC1)) buttons |= _BV(6);
	if (pinc & _BV(PC4)) buttons |= _BV(7);
	return buttons;
}

static void send_status() {
	uint8_t status = get_buttons();

	if (can_check_free_buffer()) {
		can_t msg = {
			.id = CAN_MSG_DISPLAY_STATUS,
			.flags = {
				.rtr = 0,
			},
			.length = 1,
			.data = { (uint8_t) status, },
		};
		can_send_message(&msg);
	}
}

static uint8_t read_ir() {
	// switch PD to input
	DDRD = 0x00;
	// E=0 (enable/clock) RS=0 (IR) RW=1 (read)
	PORTC = (PORTC & ~(_BV(PC5) | _BV(PC7))) | _BV(PC6);
	_delay_us(0.23);
	// E=1 (enable/clock)
	PORTC |= _BV(PC7);
	_delay_us(0.16);
	uint8_t data = PIND;
	_delay_us(0.23 - 0.16);
	// E=0 (enable/clock)
	PORTC &= ~_BV(PC7);
	_delay_us(0.01);
	// reset to idle
	PORTC = _BV(PC6) | _BV(PC7);
	DDRD = 0xff;
	return data;
}

static uint8_t read_dr() {
	// switch PD to input
	DDRD = 0x00;
	// E=0 (enable/clock) RS=1 (IR) RW=1 (read)
	PORTC = (PORTC & ~_BV(PC7)) | (_BV(PC5) | _BV(PC6));
	_delay_us(0.23);
	// E=1 (enable/clock)
	PORTC |= _BV(PC7);
	_delay_us(0.16);
	uint8_t data = PIND;
	_delay_us(0.23 - 0.16);
	// E=0 (enable/clock)
	PORTC &= ~_BV(PC7);
	_delay_us(0.01);
	// reset to idle
	PORTC = _BV(PC6) | _BV(PC7);
	DDRD = 0xff;
	return data;
}

static void write_ir(uint8_t data) {
	// E=0 (enable/clock) RS=0 (IR) RW=0 (write)
	PORTC &= ~(_BV(PC5) | _BV(PC6) | _BV(PC7));
	_delay_us(0.23);
	// E=1 (enable/clock)
	PORTC |= _BV(PC7);
	// data
	PORTD = data;
	_delay_us(0.23);
	// E=0 (enable/clock)
	PORTC &= ~_BV(PC7);
	_delay_us(0.01);
	// reset to idle
	PORTC = _BV(PC6) | _BV(PC7);
	PORTD = 0x00;
}

static void write_dr(uint8_t data) {
	// E=0 (enable/clock) RS=1 (IR) RW=0 (write)
	PORTC = (PORTC & ~(_BV(PC6) | _BV(PC7))) | _BV(PC5);
	_delay_us(0.23);
	// E=1 (enable/clock)
	PORTC |= _BV(PC7);
	// data
	PORTD = data;
	_delay_us(0.23);
	// E=0 (enable/clock)
	PORTC &= ~_BV(PC7);
	_delay_us(0.01);
	// reset to idle
	PORTC = _BV(PC6) | _BV(PC7);
	PORTD = 0x00;
}


static void wait_ready() {
	while (read_ir() & _BV(7));
}

static void write_display(uint8_t command, const uint8_t *data, uint8_t length) {
	wait_ready();
	write_ir(command);
	for (uint8_t i = 0; i < length; i++) {
		write_dr(data[i]);
	}
}

static void loop() {
	// Check for new messages
	if (can_check_message()) {
		can_t msg = { 0 };
		uint8_t status = can_get_message(&msg);
		if (status != 0) {
			switch (msg.id) {
			case CAN_MSG_DISPLAY_STATUS:
				send_status();
				break;
			case CAN_MSG_DISPLAY_CMD:
				if (msg.length >= 1) {
					write_display(msg.data[0], &msg.data[1], msg.length - 1);
				}
				break;
			case CAN_MSG_AUTO_STATUS:
				if (msg.length == 1) {
					report_change = msg.data[0] ? true : false;
				}
				break;
			}
		}
	}
}

int main() {
	init();
	while (1) {
		loop();
	}
}