Fix output filenames in README
This commit is contained in:
parent
c1b708c332
commit
add9a328a2
1 changed files with 4 additions and 4 deletions
|
@ -27,10 +27,10 @@ patterns.
|
||||||
|
|
||||||
* Install the [xa65][xa65] toolchain.
|
* Install the [xa65][xa65] toolchain.
|
||||||
* Clone this repository.
|
* Clone this repository.
|
||||||
* Run `make`. This will produce (among other) the following files:
|
* Run `make`. This will produce (among other) the following files in the `out/` directory:
|
||||||
* `memtest*k-f000.901465.bin`: 4K, 8K, 16K and 32K variants of the binary you'll later flash to an ((E)E)PROM.
|
* `memtest*k-f000.901465.bin`: 4K, 8K, 16K and 32K variants of the binary you'll later flash to an ((E)E)PROM.
|
||||||
* `out/memtest4k-f000-ascii.emu6502.bin`: The same code, but text is rendered as ASCII instead of PETSCII. Used by the emulator.
|
* `memtest4k-f000-ascii.emu6502.bin`: The same code, but text is rendered as ASCII instead of PETSCII. Used by the emulator.
|
||||||
* `out/emu6502`: A MOS 6502 emulator for testing.
|
* `emu6502`: A MOS 6502 emulator for testing.
|
||||||
|
|
||||||
## Testing in the Emulator
|
## Testing in the Emulator
|
||||||
|
|
||||||
|
@ -47,7 +47,7 @@ Run `out/emu6502`.
|
||||||
## Run on a Real PET / CBM
|
## Run on a Real PET / CBM
|
||||||
|
|
||||||
* Figure out how much memory your device has. Choose the appropriate image (`memtest4k`, `memtest8k`, `memtest16k` or `memtest32k`).
|
* Figure out how much memory your device has. Choose the appropriate image (`memtest4k`, `memtest8k`, `memtest16k` or `memtest32k`).
|
||||||
* Flash the `memtest*k-f000.901465.bin` image to a ((E)E)PROM compatible to the MOS 901465 ROM chip.
|
* Flash the `out/memtest*k-f000.901465.bin` image to a ((E)E)PROM compatible to the MOS 901465 ROM chip.
|
||||||
* Most parallel ROMs of at least 4KiB should be usable, just short the excess uppermost address pins to GND and ensure pin compatibility, e.g. through an adapter PCB.
|
* Most parallel ROMs of at least 4KiB should be usable, just short the excess uppermost address pins to GND and ensure pin compatibility, e.g. through an adapter PCB.
|
||||||
* Remove the KERNAL ROM (the one mapped to `$f000:$ffff`) from your PET / CBM.
|
* Remove the KERNAL ROM (the one mapped to `$f000:$ffff`) from your PET / CBM.
|
||||||
* Place the memtest ROM into the same socket.
|
* Place the memtest ROM into the same socket.
|
||||||
|
|
Loading…
Reference in a new issue