flow3r-openhab

An app for the CCCamp 2023 flow3r badge that submits detected touch gestures to an MQTT broker.

I wrote this so that the flow3r can be used as a remote control for OpenHAB (which subscribes to the MQTT broker), but it should be usable with other subscribers as well.

Installation

Copy flow3r_openhab/config.example.json to flow3r_openhab/config.json and enter your configuration details.
Copy the flow3r_openhab directory to /sys/apps/flow3r_openhab on the flow3r's flash filesystem.
Reboot the flow3r and start the OpenHAB app

MQTT Topics

flow3r-<macaddress>/event: The app publishes events to this topic. see "Events" below.
flow3r-<macaddress>/status: The app publishes the string Online to this topic when started, and submits an Offline LWT message.
flow3r-<macaddress>/ui_config: You can publish a label for each petal to this topic, which will be shown on the flow3r's display. See "UI Config" below.

Events

The touch events detected by the flow3r are published to the topic flow3r-<macaddress>/event.

Each event is a JSON string that looks like this:

{"petal":"2","event":"touch_tip","dx":8083,"dy":6960,"duration":150}

The keys and their values are defined as follows:

Key	Value
`petal`	The petal the event was detected on. Uses the numbers printed on the PCB (1-10), rather than the `captouch` indexes (0-9).
`event`	The type of gesture that was detected. One of `touch_tip`, `touch_base`, `swipe_up`, `swipe_right`, `swipe_down`, `swipe_left`, whereas `swipe_up` always means a swipe towards the tip of the petal, and `swipe_down` towards its base.
`dx`	The distance between start and end of the touch event in `x` (base-to-tip) direction. Unitless number, as returned by captouch's `position()` function.
`dy`	The distance between start and end of the touch event in `y` (side-to-side) direction.
`duration`	The duration between start and end of the touch event in `ms`.

UI Config

The app subscribes to the topic flow3r-<macaddress>/ui_config, at which it listens for JSON arrays such as below:

["I", "II", "III", "IV", "V", "VI", "VII", "VIII", "IX", "X"]

Each position in the array corrensponds to one of the petals, and the text for each petal is shown on the display close to the corresponding petal.

Integration into OpenHAB

The following is an example of how this can be integrated into OpenHAB.

The recommended Thing definition is as follows:

label: flow3r
thingTypeUID: mqtt:topic
configuration:
  availabilityTopic: flow3r-<macaddress>/status
  payloadNotAvailable: Offline
  payloadAvailable: Online
channels:
  - id: event
    channelTypeUID: mqtt:trigger
    label: Event
    configuration:
      stateTopic: flow3r-<macaddress>/event
  - id: ui_config
    channelTypeUID: mqtt:string
    label: UI Config
    configuration:
      commandTopic: flow3r-<macaddress>/ui_config

The UI Config can be performed easiest by creating a rule that is triggered by the Online message on the status topic:

configuration: {}
triggers:
  - id: "1"
    configuration:
      thingUID: mqtt:topic:...
      status: ONLINE
    type: core.ThingStatusUpdateTrigger
conditions: []
actions:
  - inputs: {}
    id: "2"
    configuration:
      itemName: flow3r_ui_config  # item needs to be created and linked to the ui_config topic beforehand
      command: '["I", "II", "III", "IV", "V", "VI", "VII", "VIII", "IX", "X"]'
    type: core.ItemCommandAction

For handling touch gestures, another rule can be created; the example below runs a JS script that parses the JSON payload and reacts on a long press on petal 10:

configuration: {}
triggers:
  - id: "1"
    configuration:
      thingUID: mqtt:topic:...
      channelUID: mqtt:topic:...:event
    type: core.ChannelEventTrigger
conditions: []
actions:
  - inputs: {}
    id: "2"
    type: script.ScriptAction
    configuration:
      type: application/javascript
      script: >-
        var payload = JSON.parse(this.event.event);        
		if (payload.petal == "10" and payload.duration > 1000) {
		  console.log("longpress!");
		}

License

MIT License

4.3 KiB Raw Blame History