s3lph/esp8266-mqtt-projector-serial
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity Actions
esp8266-mqtt-projector-serial/README.md

2 KiB
Raw Blame History

Remote control the CCC Basel video projector via MQTT ( -> ESP8266 -> RS232 -> projector ).

This repo contains

  • A PlatformIO project for an ESP8266 firmware which connects to an MQTT server and subscribes to certain command topics
  • A KiCad project for an adapter and power supply PCB which connects an ESP-01 to a MAX3232 board and provides power to both from a USB Micro-B socket.

ESP8266 Firmware

Building

Edit esp/src/main.cpp and set the configuration (WiFi credentials, MQTT broker & topic)!

For Sanyo Z4:

cd esp
pio run -e sanyoz4 -t upload --upload-port /dev/tty<X>

For Benq X3000i

cd esp
pio run -e benqx3000i -t upload --upload-port /dev/tty<X>

PCB

Screenshot of the PCB in PCBNew

BOM

  • ESP-01
  • A MAX3232 + D-Sub 9 connector board
  • 1x 10k 0805 SMD Resistor
  • 1x 2x2 2.54mm pin header
  • 1x 2x4 2.54mm socket header
  • 1x 1x4 2.54mm socket header
  • 2x 2.54mm jumpers
  • USB Micro-B socket
  • SOT-223 3v3 voltage regulator

Assembly

  1. The copper side (bottom) faces the MAX3232 board, with the 1x4 socket header plugged into the matching in header on the MAX3232 board.
  2. The 2x4 socket header faces the other direction, this is where the ESP-01 is plugged into
  3. The 2x2 in header can face either direction (if facing down, check beforehand whether there's enough space to the MAX3232 board
  4. The jumpers go next to each other on the 2x2 pin header. Depending on their orientation, Rx and Tx can be swapped if necessary.